MTRX2 1KW Mono Amplifiers
Hot on the heels of Ed Meitner’s ground breaking reference MTRX amplifier, comes the eagerly anticipated debut of its smaller sibling monoblocks, the MTRX2.
The MTRX2s are 1KW Class A/B solid-state powerhouses built using MTRX technology.
Capable of driving the most fiendish and complex speaker loads effortlessly, while sounding as sweet, musical and detailed as a classic single-ended triode tube amps. "It is truly a gentle giant," as Ed would say.
The MTRX2 monoblocks achieve their superlative performance and transparency using 21st century technology, along with proprietary Meitner circuit topologies and zero overall negative feedback developed in Ed’s reference MTRX monoblocks.
These monoblocks have been meticulously designed, from its short and fully balanced audio paths throughout, to its proprietary power systems and beautifully finished chassis and custom plated panels.
MTRX2 systems are fully discrete, offering ultra low distortion, very high bandwidth and the ability to deliver massive transient currents instantaneously. It also employs EMM Lab’s custom made ceramic PCB boards plus a host of proprietary systems for speaker protection and self-protection.
Conservatively rated at 1000W into 4Ω. The MTRX2 is also completely stable driving difficult, complex loads, and has the uncanny ability to drive low impedance speakers down to an Ohm! All while keeping distortion at miniscule levels.
The MTRX2 monoblock amplifiers just like EMM Lab’s reference MTRX amplifiers are designed, manufactured, and built in Canada with no compromise.
Specification
Frequency Response: DC - 500Khz (Full Rated Power) Signal to Noise: > 120dB (A Weighted) THD+N : < 0.005% (20-20Khz, Full Rated Power) IMD: < 0.005% Slew Rate: > 100V/μS Damping Factor: > 1000
Inputs: 1 Balanced (XLR) 1 Un-balanced (RCA) 1 RS-232 Communication Port 1 USB Communication Port 1 250V/30A IP44 Industrial Power Inlet
Input impedance: 100KΩ Balanced (XLR) 100KΩ Un-balanced (RCA)
Outputs: 2 Sets Furutech Binding Posts
Output Power: 1000W into 4Ω
Power: 100/115/240V, 50/60Hz (Factory Built)
Finish: Silver and Black Ultrafine CNC Precision Finish Standard black or premium 24K Gold/Silver/Custom plated insert and power button
Custom Kimber Kable 30A Power CableCustom EMM Labs Flight Case
Amplifier Dimensions (W x D x H): 544 x 584 x 297 mm, 21.4 x 23 x 11.7 inches Weight: 82kg, 180lbs
EMM LABS AUDIO WARRANTY STATEMENT
Your new EMM Labs product is warranted to be free from defects in materials and workmanship for a specified period, subject to the limitations contained in this warranty.
EMM Labs warrants the product against defects in material and workmanship under normal use and service for a period of time specified by the product’s serial number from the date of first delivery to the owner. The warranty time period is 5 years. Warranty is limited to the original owner and is non-transferable.
The period of warranty coverage for your EMM Labs product can be found in your owner's manual.
For all warranty claims, a copy of the original invoice must accompany the product.
Opening the product or modifying it in any way by the owner, including but not limited to cryogenic treatment, will void any warranty.
Please contact Audio Visual Technology Solutions LTD for RMA number and shipping instructions before shipping any products to EMM Labs.
EMM Labs products are sold worldwide through authorized dealers with restricted territories. EMM Labs product purchased from non-authorized dealers or from a dealer selling outside his / her authorized territory will automatically void product warranty.
This Warranty Is Subject To The Following Limitations THIS WARRANTY DOES NOT COVER:
PLEASE RETAIN A COPY OF THE ORIGINAL PROOF-OF-PURCHASE. It will be necessary should in-warranty service ever be required.
The above warranties do not apply if the product has been damaged by accident or misuse or as a result of modification by other than the EMM Labs service facility.
EMM Labs or Audio Visual Technology Solutions shall not be held liable for incidental or consequential damages of any kind arising from the sale or use of its products. Some sates do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Warranty Outside the United States EMM Labs has formal distribution agreements in many countries. The EMM Labs importer in those countries has assumed the responsibility for servicing EMM Labs products. Please contact the dealer or distributor in the country where you purchased your product for any service issues
Note: All warranty returns should be sent to Audio Visual Technology Solutions (UK) Limited freight prepaid through an authorised UK dealer and must be accompanied by proof of purchase (a copy of the original sales receipt). Direct returns from consumers or non-authorised dealers will be refused unless specifically authorised by Audio Visual Technology Solutions (UK) Limited with a valid return authorisation number. Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date code. Coverage may be invalidated as this date is previous to purchase date. Return only defective components. Non-defective items received will be returned freight-collect at the expense of the customer. Customer is responsible for shipping charges and insurance in sending the product to Audio Visual Technology Solutions (UK) Limited. Freight damage on returns is not covered under warranty. Always include proof of purchase (sales receipt).
Note: Products that require inspection and repair should be packed carefully, preferably in the original packaging material. Audio Visual Technology Solutions (UK) Limited may charge the customer under its discretion for supplying new packaging material if deemed that the packaging material supplied by the customer is not fit for shipping of the products after remedial work is complete.
Note: Products purchased from unauthorised dealers are not covered under warranty. Please see our list of authorised UK dealers.