MTRS Stereo Amplifier
EMM Labs is proud to present its latest innovation in audio technology: the MTRS Stereo Amplifier. The MTRS is a 400W Stereo Class A/B solid-state amplifier.
The MTRS is able to drive the most severe loads with no overall feedback, using Ed's completely re-designed high current Meitner Power Driver. The MTRS can handle any speaker load with ease, delivering high power, low distortion and wide bandwidth.
The MTRS also incorporates::
The MTRS has been meticulously designed, from its short and fully balanced audio paths throughout, to its proprietary power systems and beautifully finished chassis.
The MTRS is completely stable driving difficult, complex loads, and has the uncanny ability to drive low impedance speakers down to an Ohm! All while keeping distortion at miniscule levels.
The MTRS is the ultimate amplifier for those who demand the best in audio reproduction in a stereo package.
Just like EMM Labs’s reference MTRX and MTRX2 amplifiers, the MTRS Stereo Amplifier is designed, manufactured, and built in Canada with no compromise.
Specification
Power: 400W Peak Power per Channel into 4Ω 330W RMS Continuous Power per Channel into 4Ω
Voltage Gain: 30dB Frequency Response: 0.1hz - 200Khz (Full Rated Power) Signal to Noise: Greater than 120dB (A Weighted) THD+N : Less than 0.01% (20-20Khz, Full Rated Power) IMD: Less than 0.01% (20-20Khz, Full Rated Power) Slew Rate: Greater than 100V/μS Damping Factor: Greater than 200
Inputs: Left and Right Balanced (XLR) Left and Right Un-balanced (RCA)
Input impedance: 100KΩ Balanced (XLR) 100KΩ Un-balanced (RCA)
Outputs: Left and Right Sets of Furutech Binding Posts
System: RS-232 Communication Port
Power & Accessories: 30A 250V 3-pin, IP44, IEC60309 type power inlet Custom Kimber Kable 30A Power Cable Custom EMM Labs Flight Case
Amplifier Dimensions (W x D x H): 544 x 584 x 297 mm, 21.4 x 23 x 11.7 inches
Amplifier Weight: 82kg, 180lbs
Finish: Silver and Black Ultrafine CNC Precision Finish
EMM LABS AUDIO WARRANTY STATEMENT
Your new EMM Labs product is warranted to be free from defects in materials and workmanship for a specified period, subject to the limitations contained in this warranty.
EMM Labs warrants the product against defects in material and workmanship under normal use and service for a period of time specified by the product’s serial number from the date of first delivery to the owner. The warranty time period is 5 years. Warranty is limited to the original owner and is non-transferable.
The period of warranty coverage for your EMM Labs product can be found in your owner's manual.
For all warranty claims, a copy of the original invoice must accompany the product.
Opening the product or modifying it in any way by the owner, including but not limited to cryogenic treatment, will void any warranty.
Please contact Audio Visual Technology Solutions LTD for RMA number and shipping instructions before shipping any products to EMM Labs.
EMM Labs products are sold worldwide through authorized dealers with restricted territories. EMM Labs product purchased from non-authorized dealers or from a dealer selling outside his / her authorized territory will automatically void product warranty.
This Warranty Is Subject To The Following Limitations THIS WARRANTY DOES NOT COVER:
PLEASE RETAIN A COPY OF THE ORIGINAL PROOF-OF-PURCHASE. It will be necessary should in-warranty service ever be required.
The above warranties do not apply if the product has been damaged by accident or misuse or as a result of modification by other than the EMM Labs service facility.
EMM Labs or Audio Visual Technology Solutions shall not be held liable for incidental or consequential damages of any kind arising from the sale or use of its products. Some sates do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Warranty Outside the United States EMM Labs has formal distribution agreements in many countries. The EMM Labs importer in those countries has assumed the responsibility for servicing EMM Labs products. Please contact the dealer or distributor in the country where you purchased your product for any service issues
Note: All warranty returns should be sent to Audio Visual Technology Solutions (UK) Limited freight prepaid through an authorised UK dealer and must be accompanied by proof of purchase (a copy of the original sales receipt). Direct returns from consumers or non-authorised dealers will be refused unless specifically authorised by Audio Visual Technology Solutions (UK) Limited with a valid return authorisation number. Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date code. Coverage may be invalidated as this date is previous to purchase date. Return only defective components. Non-defective items received will be returned freight-collect at the expense of the customer. Customer is responsible for shipping charges and insurance in sending the product to Audio Visual Technology Solutions (UK) Limited. Freight damage on returns is not covered under warranty. Always include proof of purchase (sales receipt).
Note: Products that require inspection and repair should be packed carefully, preferably in the original packaging material. Audio Visual Technology Solutions (UK) Limited may charge the customer under its discretion for supplying new packaging material if deemed that the packaging material supplied by the customer is not fit for shipping of the products after remedial work is complete.
Note: Products purchased from unauthorised dealers are not covered under warranty. Please see our list of authorised UK dealers.